Residential · Myrtle Beach, SC
If claws, nose pushes, or pawing keep tearing your mesh, pet screen is the upgrade that holds up. Myrtle Beach Screens installs and repairs pet screen for doors, patios, lanais, and pool enclosures in Myrtle Beach, using heavy-duty vinyl-coated polyester that resists rips and stretching.
Prep starts with measuring the opening and checking the frame for square, bowing, loose corners, and stripped screw channels. We remove failed mesh, old spline, and damaged retaining strips, then clean the spline groove so the new material seats evenly. For pet screen jobs, we confirm frame depth, spline diameter (commonly 0.140-0.175 inch), and whether the opening needs mid-rails or corner braces to prevent flexing. Hardware gets evaluated too, including hinges, closers, rollers, and handle sets, because a misaligned door can chew through even the toughest mesh.
Along the coast, heat, humidity, salt air, and wind-driven rain can shorten the life of standard fiberglass. Pet screen uses a thicker, vinyl-coated polyester yarn that handles impact better and is less likely to ladder or tear at the edges, but it still needs correct tension and edge control to look clean. We tension the mesh with a screen rolling tool, lock it in with the right spline, and trim for a straight, tight finish without scallops or waviness. Where glare and heat are an issue, we can discuss darker pet screen options for improved outward visibility while keeping durability front and center.
Homeowners and property managers choose Myrtle Beach Screens because we do the unglamorous details that stop repeat failures. Since 2015, our work has focused on real-world screening problems like pets hitting the same spot daily, doors that rack out of square, and enclosures that flex in storms. We are licensed and insured, we provide free written estimates, and we explain material choices plainly so you know what you are paying for. If the right fix is reinforcement, a new door, or correcting the frame before rescreening, we will tell you up front.
After installation or repair, we do a closing walkthrough: check for uniform tension, tight spline seating, clean corners, and smooth door operation with no rub points. You get a pet screen that is neatly trimmed, secure in the channel, and built to take scratching and pushing without popping loose. We also point out simple care tips, like rinsing salt residue, keeping pets’ nails trimmed, and addressing loose hinges early to prevent stress on the mesh. When you call, you can expect clear scheduling, a written scope, and workmanship aimed at fewer callbacks and longer screen life.
Yes. We provide a free written estimate after a quick site visit and measurement, including material options and the scope of repairs or rescreening.
Yes. If the surrounding panels and spline are in good shape, we can replace a single panel or a small section and blend the mesh as closely as possible.
Yes. We repair torn mesh, blown-out panels, and damage around doors and high-impact sections, and we’ll note any frame issues that need correction before rescreening.
Common options include standard fiberglass mesh, pet-resistant mesh, aluminum screen, and solar/insect screening. We’ll recommend the best fit based on use, exposure, and visibility goals.
Yes. We service multi-unit buildings, property managers, and HOA common areas with screening repairs, rescreening, and maintenance work to keep enclosures uniform and presentable.
A torn screen is more than an eyesore, it is an open invitation for bugs and a constant maintenance loop when pets keep hitting the same weak spot. Pet screen is designed for higher abuse than standard fiberglass, using heavy-duty vinyl-coated polyester mesh that resists tearing, stretching, and edge blowouts. Myrtle Beach Screens installs and repairs pet screen on screen doors, patio openings, lanais, and pool enclosures, matching the right spline size and tension so the mesh stays seated and clean-looking over time.
Not every “pet damage” job is solved by swapping mesh. If a door is sagging, rollers are worn, or the frame is flexing, the screen will fail again at the same edge. We start by inspecting the frame, corners, and hardware, then choose the correct spline diameter and install method to lock the pet screen into the channel without over-stretching it. That combination is what prevents loose edges, wrinkles, and premature pull-out.
Pet screen can slightly reduce airflow compared to lighter meshes, so we help you choose the best balance for the opening, whether you want maximum durability for a dog door area or better visibility on a patio panel. For repairs, we can replace torn sections, re-spline loose runs, and correct the underlying door or frame issues that caused the failure. The goal is a stronger screen that still looks straight and professional.
If you need pet screen installation or pet screen repair in Myrtle Beach, our team will provide a free written estimate and a straightforward plan, including material selection, hardware fixes if needed, and a final walkthrough. You end up with a screen that stands up to daily pet traffic and keeps your space comfortable, enclosed, and easy to maintain.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Myrtle Beach. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
