Serving Myrtle Beach and surrounding areas. (843) 428-2271
Myrtle Beach Screens Myrtle Beach Screens Proudly serving Myrtle Beach since 2015 (843) 428-2271

Myrtle Beach Screens

Myrtle Beach Screens has served Myrtle Beach since 2015, delivering dependable screening construction, repairs, and rescreens for homeowners and businesses. We specialize in pool enclosures, screen rooms and lanais, full rescreening, screen door installs, and storm-damage repairs. Expect straight answers, a free written estimate, clean prep, and tight, even screen tension with a finish that holds up.

  • Licensed & Insured
  • Locally Owned
  • Serving Since 2015
Licensed & InsuredFully covered on every job
Free EstimatesClear pricing up front
On-Time & On-BudgetWork done to schedule
Locally OwnedRooted in Myrtle Beach
Screening projects by Myrtle Beach Screens in Myrtle Beach, SC

Screening built to fit, tensioned to last

We build and rescreen pool enclosures, screen rooms, and porch systems using aluminum framing, fiberglass or polyester mesh, and pet-resistant options for high-wear openings. Every panel is cut clean, seated with the correct spline diameter, and tensioned evenly to prevent waves, rub points, and early tears.

Door performance matters, so we tune hinges, closers, latches, and strike alignment during installs and rescreens. When frames are out of square or rails are bent, we correct the structure first so the screening is not doing the job of the framing.

Screening projects by Myrtle Beach Screens in Myrtle Beach, SC

Straight estimates, clean worksite, dependable finish

Our process starts with on-site measuring, a frame and hardware check, and a written scope that calls out mesh type, panel count, door work, and any frame repairs. We confirm practical specs like screen color, visibility, and durability before ordering materials.

During installation we protect decks and pool areas, remove old mesh and spline, and fasten new screening without scuffing frames. You get a final walkthrough that confirms tight panels, smooth door operation, and a cleanup that leaves the area ready to use.

Our Services

Our Screening Services in Myrtle Beach, SC

Pool Screen Enclosure Installation & Repair

A pool screen enclosure should block bugs and wind-blown debris, stay tight in storms, and look clean from every angle. Myrtle Beach Screens has served Myrtle Beach since 2015 with aluminum screen enclosure installation, rescreening, and structural repairs built around proper anchoring, straight lines, and long-lasting mesh.

Learn More

Patio Screen Enclosure Installation & Repair

A patio screen enclosure should feel tight, straight, and easy to live with, not loose, sagging, or rattling in the wind. Since 2015, Myrtle Beach Screens has installed and repaired patio screen enclosure systems in Myrtle Beach using corrosion-resistant aluminum framing and clean, durable screening details.

Learn More

Lanai Screen Enclosure Installation & Repair

A lanai screen enclosure should feel tight, square, and easy to live with, not racked, sagging, or full of gaps. Myrtle Beach Screens has served Myrtle Beach since 2015, installing new enclosures and repairing storm damage, loose panels, torn mesh, and failing doors.

Learn More

Screen Door Installation & Repair

A screen door should swing smoothly, latch cleanly, and keep bugs out without dragging or rattling. Myrtle Beach Screens has served Myrtle Beach since 2015, handling screen door installation, re-screening, and repairs for homes and commercial entries.

Learn More

Screen Porch Enclosure Installation & Repair

A screen porch should block insects, shed wind-driven rain, and still feel open and breezy. Serving since 2015, Myrtle Beach Screens installs and repairs screen porch enclosures with clean aluminum framing, tight screening, and doors that latch and swing true.

Learn More

Window Screen Installation & Repair

If your window screen is torn, loose, or bowed, you lose airflow and invite insects inside. Myrtle Beach Screens (serving since 2015) installs and repairs window screen systems with clean fits, tight mesh, and hardware that works the way it should.

Learn More

How It Works

1

Tell us what you have and what failed

Send photos and measurements if available, then we confirm the enclosure type (pool cage, porch, lanai, screen room, or storefront) and the screen material options.

2

On-site measure and written estimate

We inspect frame condition, fasteners, spline channels, door operation, and wind-damage points, then provide a clear written estimate and timeline.

3

Build, rescreen, then walkthrough

We protect surfaces, remove damaged mesh, install new screening with consistent tension, tune doors and latches, and finish with a final walkthrough and care guidance.

Why Myrtle Beach Chooses Us

Quality Screening Workmanship You Can See

Experienced, licensed screening contractors delivering durable results for every home and business across Myrtle Beach.

Licensed, insured, and detail-driven

Licensed and insured screening contractor using proven aluminum framing methods, stainless fasteners where needed, and code-aware attachment practices for durable builds and repairs.

Prep and fit that prevent callbacks

We square frames, replace bent rails, re-secure loose channels, and use correct spline diameter for fiberglass and polyester screen so panels stay tight, flat, and quiet.

Clear pricing, written scope

Free written estimates with line-item scope for rescreens, door hardware, pet-resistant mesh, and panel replacements, no vague allowances or surprise add-ons.

Cities and Communities We Serve

Myrtle Beach Screens serves Myrtle Beach and 8 surrounding communities including Socastee, Forestbrook, Surfside Beach. We typically respond to new project requests within one business day and can often schedule estimates the same week.

Screening projects by Myrtle Beach Screens in Myrtle Beach, SC

Screening contractor work, done with durable materials

Myrtle Beach Screens focuses on the work that makes enclosures last: solid framing, correct screen selection, tight spline seating, and doors that close cleanly. We handle new screen rooms and porch enclosures, full rescreens, panel replacements, screen door installs, and storm-damage repairs.

Materials are chosen for performance, not buzzwords. Common solutions include fiberglass mesh for value, polyester for improved durability, and pet-resistant screen for high-traffic openings. For coastal corrosion risk, we recommend appropriate fasteners and hardware, especially on doors, hinges, and latch sets.

Screening projects by Myrtle Beach Screens in Myrtle Beach, SC

Built for the Grand Strand climate and coastal wear

Along the Myrtle Beach coast, screening takes a beating from sun exposure, wind events, salt air, and fast-moving summer storms. UV and heat can make older mesh brittle, while wind-driven debris and pressure changes can pull loose spline or tear corners.

We look for the real failure points, loose or oversized spline, racked frames, damaged door closers, and corrosion at hinges and screws. When needed, we reinforce problem areas, replace worn hardware, and recommend mesh that fits the use case, including stronger options for pool enclosures, pet doors, and high-wind sides.

Screening projects by Myrtle Beach Screens in Myrtle Beach, SC

Residential and commercial screening, start to finish

Homeowners call us for pool cages, lanais, porches, patios, and screen rooms, including full rescreening and individual panel swaps. We also fix common pain points like sagging screen panels, ripped lower sections from pets, sticky screen doors, and warped or damaged frame members.

For businesses, we service screened entries, patios, and outdoor seating enclosures where appearance and uptime matter. We can schedule work to reduce disruption, replace damaged panels quickly, and keep door hardware, closers, and latches operating smoothly for customers and staff.

Screening projects by Myrtle Beach Screens in Myrtle Beach, SC

Service area around Myrtle Beach, SC

Based in Myrtle Beach, SC, we serve the Grand Strand with on-site measuring, repairs, and rescreening. Common service calls include Myrtle Beach, North Myrtle Beach, Surfside Beach, Garden City, Murrells Inlet, Conway, Carolina Forest, Little River, and Pawleys Island.

If you are just outside these areas, reach out. Share a few photos and your address and we will confirm availability and next steps for a written estimate.

What Every Myrtle Beach Homeowner Should Know About Screening

Should I rescreen the whole enclosure or patch a few panels?

If the mesh is brittle, fading, or tearing in multiple bays, a full rescreen is usually the better value and looks uniform. If the frame is solid and the damage is isolated to a few panels, targeted panel replacement can make sense. We check spline fit, frame straightness, and screen age before recommending either option.

What screen material should I choose for a pool enclosure?

Fiberglass mesh is common and cost-effective, but polyester typically holds tension longer and resists tearing better. If you have pets or frequent traffic near doors, pet-resistant screen can reduce repeat rips. We match mesh type to exposure, use, and budget.

Why does my screen keep pulling out of the frame channel?

The usual causes are incorrect spline diameter, worn spline channel, uneven tension, or a racked frame. A proper rescreen uses the correct spline size for the channel and mesh, and tension is set consistently across the panel to prevent creep and pop-outs.

How do I know if my frame can be rescreened or needs repair first?

Look for bent rails, loose uprights, corrosion at fasteners, and doors that no longer square up. We inspect corners, kick plates, mid-rails, and attachment points; if the structure is compromised, we repair or replace the affected sections before installing new mesh.

Can you fix a screen door that will not close or latch?

Yes. Many issues come from worn hinges, sagging doors, misaligned strike plates, failed pneumatic closers, or damaged rollers on sliding systems. We adjust, replace hardware as needed, and verify smooth close and latch function.

How can I make my screening last longer near the coast?

Rinse frames and hardware periodically to reduce salt buildup, keep sprinklers from soaking door hardware, and avoid pressure-washing directly into spline channels. If you have repeated corrosion or hardware failures, upgrading fasteners and door hardware can extend service life.

Frequently Asked Questions in Myrtle Beach

Do you provide free estimates?

Yes. We provide a free written estimate after evaluating the enclosure, measuring, and confirming the best material and scope for the job.

Do you handle storm-damage screen repairs?

Yes. We replace torn mesh, re-secure loose panels, repair damaged door hardware, and address common wind-failure points like pulled spline and bent frame members.

Can you replace just one screen panel?

Yes. We can replace individual panels when the surrounding mesh and frame are in good condition, and we will match material and color as closely as practical.

What types of enclosures do you work on?

We work on pool enclosures, screen rooms, lanais, porches, patios, and screened entries, including rescreening, repairs, and door installation or replacement.

Are you licensed and insured?

Yes. Myrtle Beach Screens is a licensed and insured screening contractor.

Need Reliable Screening Services?

If you're planning a screening project in Myrtle Beach, working with a dependable local contractor makes all the difference. We provide residential and commercial screening services focused on proper preparation, clear communication, and long-term performance. Whether you need a new installation or repairs to existing screening, our team is ready to help. Each project is evaluated based on site conditions, usage needs, and local requirements to ensure dependable results. If you're ready to discuss your project or need more information, reach out today and speak directly with our team.